BLOCK PAVING CLEANING IN BRISTOL (RE‑SAND & SEALING)
Nothing sharpens kerb appeal like clean, tightly jointed block paving. We provide professional block paving cleaning in Bristol, removing weeds, moss, algae, tyre marks and grime with the right method for your surface. After cleaning, we re‑sand the joints and can seal the paving to keep it looking smarter for longer.
WHY CHOOSE OUR BRISTOL BLOCK PAVING SERVICE
Based in Kingswood, Bristol (BS15 9UL), we typically work within 30–40 minutes across Bristol (including Hanham, Longwell Green, Keynsham, Saltford) and nearby Bath. We’re a local, fully‑insured specialist with tidy workmanship and before/after results that speak for themselves.
• Deep clean that tackles weeds, moss, algae, tyre marks and general soiling
• Professional re‑sand of joints (kiln‑dried) to stabilise blocks
• Optional sealing to resist stains and slow weed regrowth
• Clear advice on upkeep so your drive stays smarter for longer
• Careful around plants, thresholds and adjacent surfaces
COMMON BLOCK PAVING PROBLEMS WE FIX
• Weeds and moss rooted in joints
• Loose or slightly sunken areas from lost jointing sand*
• Slippery green film and uneven soiling
• Oil and tyre marks, rust or leaf stains in places
*If we find notable dips or movement, we can quote for minor relays/edging reset separately.
OUR BLOCK PAVING CLEANING & RE‑SAND PROCESS
- Inspection & protection — check edging, drainage and joint condition; protect nearby areas.
- Pre‑treat — apply the right agents for algae/moss; spot‑treat oil/marks.
- Clean — controlled jet washing with a rotary surface cleaner for an even finish.
- Detail & rinse — edges and corners finished carefully; manage runoff responsibly.
- Dry‑down — allow the paving to dry fully (weather dependent).
- Re‑sand joints — refill with kiln‑dried sand to stabilise and tidy the finish.
- Optional sealing — once dry (typically 24–48 hours later), apply a quality block paving sealer to bind sand, resist stains and slow regrowth.
We never blast pointing out of joints unnecessarily — the aim is a clean, even surface with properly stabilised joints.
RE‑SANDING — WHY IT MATTERS
Block paving relies on tight, dry joints to lock blocks and spread load. After cleaning, we replenish joints with kiln‑dried jointing sand so the surface sits firm and looks crisp.
• How long to set? Sand settles quickly; light foot traffic is fine.
• When can I drive on it? Usually after sand settles or once sealer has cured — we’ll advise on the day.
• Polymeric/compounds? Useful in specific cases; we’ll recommend if appropriate.
SHOULD I SEAL BLOCK PAVING?
Sealing adds a protective layer that helps bind joint sand, resist oil/water staining and slow the return of weeds, algae and lichen. We’ll confirm suitability, moisture levels and weather, then discuss finishes (natural/matt/satin).
Best candidates for sealing:
• Drives under trees (leaf tannins/green film)
• High‑traffic or oil‑prone areas
• Sloped drives where joints wash out
• Recent re‑sand you want to preserve
LOCAL CASE STUDY
Longwell Green — block‑paved driveway: deep clean, re‑sand & seal
This 65 m² driveway had heavy weed growth and loose joints. We pre‑treated algae/weeds, cleaned with a rotary surface cleaner, allowed overnight drying, then re‑sanded with kiln‑dried sand. Two days later we returned to seal the drive. Result: a sharper, richer finish and joints that resist wash‑out — much easier to keep clean.
AREAS WE COVER
We’re Bristol‑based (BS15) and usually cover 30–40 minutes: Kingswood, Hanham, Longwell Green, Keynsham, Saltford, wider Bristol and nearby Bath. If you’re close by, just ask.
FAQS — BLOCK PAVING CLEANING IN BRISTOL
Q: Do you re‑sand after cleaning?
A: Yes — once the paving is dry, we refill with kiln‑dried sand to stabilise joints and tidy the finish.
Q: Will sealing stop weeds completely?
A: It slows growth by binding sand and reducing moisture retention, but no sealer prevents wind‑blown seeds settling on the surface. With light maintenance you’ll see far fewer weeds.
Q: Can you remove oil stains?
A: Fresh spills often lift fully; older stains usually improve significantly with targeted pre‑treatments. We’ll advise honestly on expected results.
Q: How soon can I use the drive?
A: Foot traffic is fine soon after cleaning. Driving is typically OK once sand settles or after sealer cure (we’ll advise based on conditions).
Q: What if parts are sunken?
A: Minor relays or edging resets can be quoted separately. We’ll flag anything we find during inspection.
READY FOR A SAME‑DAY QUOTE?
Send your postcode, 1–2 photos and the driveway type (block paving, resin, imprinted, tarmac). Same‑day reply where possible.
Call / Text / WhatsApp: 07733 191954
Email: info@drivewaypatiocleaningbristol.co.uk
Prefer a visit? We can usually attend within 2–4 working days locally (Bristol & Bath).
Strapline: Driveway cleaning done properly — block paving re‑sand, resin soft‑wash, imprinted concrete clean & seal.