CONCRETE DRIVEWAY CLEANING IN BRISTOL & BATH (SAFETY‑FIRST, WHIRL‑A‑WAY FINISH)

Concrete drives are tough — but dirt, algae, tyre marks and oil can make them look tired and accelerate wear if left alone. We’re your local BS15 (Kingswood) specialists for concrete driveway cleaning in Bristol, also covering nearby Bath. Our safety‑first method combines very low‑pressure washing, a Whirl‑A‑Way rotary surface cleaner, and professional treatments so your concrete is deep‑cleaned evenly, protected, and stays cleaner for longer.

WHY CONCRETE DRIVEWAYS NEED PROPER CARE

• Pores + grime = problems: Concrete is porous. When the pores fill with silt, algae and oil, water no longer drains freely — leading to puddles, winter freeze/thaw stress and micro‑cracking.

• Algae = slip risk: In our damp climate, green growth makes drives slippery and dulls colour.

• Stains set fast: Oil, leaf tannins and rust can lock into the surface if not treated correctly.

Regular, correct cleaning preserves the surface, reduces slip risk, and makes every future clean faster.

OUR CONCRETE CLEANING PROCESS (SAFE & EFFECTIVE)

Assessment & protection — confirm concrete type/condition, note cracks/repairs, protect thresholds, garage doors, planting. Pre‑treatments — apply resin/concrete‑safe detergents & biocides for algae, tyre marks and general soiling; spot‑treat oil/rust. Very low‑pressure machine clean — we use a Whirl‑A‑Way rotary surface cleaner for an even, gentle finish (no striping, no gouging). Detail by hand — edges, joints and steps treated carefully; lances kept well off the surface. Rinse & tidy — low‑pressure rinse, manage runoff, clear gullies/edges. Optional: sealing — once fully dry, we can apply a concrete‑appropriate sealer to resist stains and slow green regrowth (we’ll advise if suitable).

Safety comes first: controlled pressure, slip‑risk management, the right products, and tidy site practice — every job.

STAINS, OIL & RUST — HOW WE HANDLE THEM

• Oil & tyre marks: targeted degreasers with dwell time, then controlled machine clean; honest expectations for long‑set oil.

• Algae & black spots: biocidal treatment to kill growth at the root, gentle agitation, then a careful rinse.

• Rust & leaf tannins: appropriate cleaners used sparingly and neutralised — protect finish, avoid etching.

OPTIONAL CONCRETE SEALING (ONLY IF SUITABLE)

Sealing isn’t for every drive. Where it is appropriate, a quality penetrating or film‑forming concrete sealer can:

• Resist stains (oil, food, tannins) and reduce water uptake

• Enrich colour and keep the “just‑cleaned” look longer

• Make routine rinses quicker and future deep cleans easier

We only recommend sealing after inspection, with anti‑slip additive available on film‑forming finishes

CASE STUDY — KEYNSHAM (TYRE MARKS, ALGAE, SMALL OIL SPOTS)

A concrete drive in Keynsham had dark tyre arcs, oil drips and green film.

• We pre‑treated algae and soiling, spot‑treated oil, then cleaned with a very low‑pressure Whirl‑A‑Way in overlapping passes.

• Edges and joints were detailed by hand; runoff was contained and gullies cleared.

Result: a uniform, brighter finish with slip risk removed and stains significantly reduced — no surface damage.

Caption under the photo (paste this under your case‑study image):

This photo was taken while the surface was still wet — it always looks darker straight after cleaning. As it dries, it gets lighter. The finish you see comes from our combination of Whirl‑A‑Way, Safety‑Clean approach and professional treatments. Safety comes first; the treatments continue working for days, so the drive often looks even brighter afterwards.

RESIDENTIAL FIRST (COMMERCIAL ON REQUEST)

We prioritise residential concrete drives and paths across Bristol and Bath. We also take on select commercial/communal areas by request — scheduled to minimise disruption.

AREAS WE COVER

Based in Kingswood (BS15), we typically cover 30–40 minutes across Bristol (e.g., Clifton, Longwell Green) and nearby Bath, plus Keynsham and Saltford. If you’re close by, just ask.

FAQS — CONCRETE DRIVEWAY CLEANING

Will pressure washing damage my concrete?

Improper high pressure can etch concrete. We use very low pressure, the Whirl‑A‑Way rotary head and the right treatments for an even, safe clean.

Can you remove oil stains completely?

Fresh oil often lifts well; older stains usually improve a lot with pre‑treatments — we’ll set honest expectations before we start.

Do you remove the slippery green film?

Yes — we treat growth at the root, agitate and rinse gently. This slows regrowth so it stays cleaner longer.

Should I seal my concrete drive?

Sometimes. If a suitable sealer will genuinely help your surface and usage, we’ll recommend it; otherwise we’ll advise don’t seal.

How soon can I use the drive?

Usually same day once dry underfoot. If sealing is applied, we’ll confirm cure times before vehicle access.

READY FOR A SAME‑DAY QUOTE?

Send your postcode and 1–2 photos and we’ll reply the same day wherever possible.

Call / Text / WhatsApp: 07733 191954

Email: info@drivewaypatiocleaningbristol.co.uk

Prefer a visit? We can usually attend within 3–4 working days locally (Bristol & Bath).

Strapline: Concrete driveway cleaning done properly — very low pressure, Whirl‑A‑Way rotary clean, professional treatments. Safety‑first and fully insured.