Soft Wash Driveway, Patio and Wall Cleaning in Bristol & Bath — Safe, Long‑Lasting Results
Make your drive, patio and walls look new again — without damage. We’re your local BS15 (Kingswood) specialists providing professional soft washing (and targeted pressure washing where appropriate) for all types of driveways, patios, walls and façades across Bristol and Bath (30–40 minutes’ radius). Our approach removes algae, moss, lichen and grime safely from delicate surfaces like render and Bath stone, and restores tougher areas such as block paving, pattern imprinted concrete, cobblestone/setts, resin‑bound, tarmac and concrete slabs. Same‑day quotes where possible, careful plant protection, and a tidy, fully insured service.
Why Choose Soft Washing (and When We Combine It with Pressure Washing)
Soft washing uses low pressure plus specialist biodegradable treatments to kill growth at the root and lift staining — ideal for:
- Delicate surfaces: render, Bath stone, natural stone, painted walls, older masonry
- Porous paving: Indian sandstone, limestone, concrete flags (reduced risk of etching)
- Imprinted/sealed finishes: cleans without stripping colour or sealer
On harder surfaces (e.g., heavily soiled concrete), we may combine a controlled pressure rinse with soft‑wash pre‑treatments for the safest, best finish.
Driveways & Patios — All Surface Types Cleaned
We clean and treat every common driveway and patio surface in Bristol & Bath:
- Block paving — soft wash protects joint sand; optional re‑sanding and sealing available
- Pattern imprinted concrete — lifts algae and tyre marks without damaging decorative colour/sealer
- Cobblestone / setts — deep clean between joints; removes moss and weeds
- Indian sandstone & natural stone — safely removes green staining and stubborn black lichen spots
- Resin‑bound / resin‑bonded — gentle cleaning to preserve the resin surface
- Tarmac / asphalt — low‑pressure treatment to avoid raveling
- Concrete slabs & pressed concrete — pre‑treat + careful rinse for a bright, even finish
What We Tackle on Drives & Patios
- Algae, moss and lichen (including black spot on stone)
- General grime, tyre marks and atmospheric staining
- Weeds in joints (treatment + removal; re‑sand block paving on request)
- Oil spots (targeted degreasing where appropriate)
Walls & Façades — Render and Bath Stone Soft Washed
Your vertical surfaces make the biggest first impression. We soft wash walls and façades across Bristol and Bath, including:
- Render (e.g., K‑rend, monocouche) — removes green algae streaks; restores original colour
- Bath stone & heritage stone — gentle, low‑pressure cleaning to lift staining without scarring; Bath stone stain removal included
- Painted masonry & brick — cleans soot, algae and grime while protecting coatings
We protect nearby planting and finishes, apply correct dwell times, and rinse at low pressure for a clean that lasts longer than a simple jet‑wash.
Our Safe, Tidy Process
- Survey & protect — assess access, materials and drainage; protect plants and delicate areas
- Pre‑treat — professional biocidal solution applied at low pressure to kill growth at the source
- Dwell — allow chemistry to break the bond of algae/lichen and lift staining
- Clean — soft‑wash rinse; targeted low/medium pressure where appropriate (never harsh on delicate areas)
- Detail — edges, joints, steps, thresholds and upstands
- Finish — site tidy, optional re‑sand (block paving), optional seal advice
Real Results — Recent Local Case Studies
Redland (Bristol): Imprinted Concrete Driveway
Drive covered in algae haze and tyre shadowing. We pre‑treated with a soft‑wash solution, allowed dwell time, then gently rinsed. The pattern and colour returned without stripping the sealer. Client opted for a fresh top‑up seal a week later — driveway now beads water and looks newly laid.
Keynsham: Cobblestone Drive & Indian Sandstone Patio
Moss and weeds in cobble joints; black lichen on patio. We applied a biocidal pre‑treatment, carefully removed growth, and finished with a low‑pressure rinse. Joints were cleared, lichen significantly reduced, and overall colour restored. Patio stayed bright through the following winter.
Bath (BA2): Render & Bath Stone Walls
Green algae streaks and pollution film on a period façade. We soft washed the render and Bath stone with appropriate dwell times and a gentle rinse. The façade regained its original tone with no damage to the substrate — and the treatment continues to inhibit regrowth.
Why Homeowners in Bristol & Bath Choose Us
- Surface‑safe methods — soft wash first; pressure only where appropriate
- Long‑lasting results — treats the cause (algae/lichen), not just the symptom
- All drive & patio types — block paving, imprinted concrete, cobblestone, resin, tarmac, stone
- Walls, render & Bath stone — gentle façade cleaning that protects your property
- Tidy & insured — careful protection and clean finish; fully insured for your peace of mind
- Fast quotes — send postcode + photos for a same‑day response where possible
Areas We Cover
Based in Kingswood (BS15). We cover all Bristol BS postcodes — Clifton, Redland, Bishopston, Henleaze, Westbury‑on‑Trym, Stoke Bishop, Southville, Brislington, Downend, Emersons Green, Keynsham, Hanham, Longwell Green — plus Bath (BA1, BA2) and surrounding villages (typically within 30–40 minutes).
FAQs — Soft Wash Driveway, Patio & Wall Cleaning
Is soft washing better than jet washing?
For render, Bath stone, natural stone and painted walls — yes. Soft washing cleans deeply and safely. For robust paving, we often combine soft wash with a controlled pressure rinse for the best outcome.
Will soft washing remove black spots on my patio?
Our lichen treatment targets black spots at the root. Most patios see a dramatic improvement after one treatment; very old/deep lichen can need a follow‑up.
Is it safe for plants and pets?
We use professional, biodegradable treatments with plant protection and thorough rinsing. We’ll advise simple on‑the‑day precautions (e.g., short drying period).
Do you re‑sand or seal block paving?
Yes — we can re‑sand joints after cleaning once the surface is dry, and advise on sealing to lock in the clean and resist staining.
How long do results last?
Typically 12+ months. Because we treat growth at the source, surfaces stay cleaner longer than with pressure washing alone.
Do you cover Bath as well as Bristol?
Yes — Bath and nearby villages are fully covered. We regularly work on Bath stone and rendered façades.
Ready for a Same‑Day Quote?
Fastest way: send your postcode and 1–2 photos of the areas to be cleaned. We’ll reply quickly — often the same day.
Call / Text / WhatsApp: 07733 191954
Email: info@drivewaypatiocleaningbristol.co.uk
Prefer a visit? We can usually attend within 3–4 working days in Bristol (Bath on request).